Clinton-electronics CE-REMOTE Manual do Utilizador descarregar pdf

CE-REMOTE Instruction Guide

STEP 1: Connecting the Remote to the Camera

Locate the CE-REMOTE DIN port on the camera and plug in

the CE-REMOTE. The DIN connection is typically found as

shown below.

DOME CAMERAS: Remove dome cover & locate port as shown.

BULLET CAMERAS: Unscrew cap and locate port as shown.

NOTE: Other variations of Bullet Cameras may have the DIN

connection as a seperate cable with the power and video

cables or the DIN port will be next to the bracket on the back

of the camera.

TURRET CAMERAS: Unscrew the cap & locate port as shown.

STEP 2: Test Monitor Connection

Connect your test monitor to the BNC connection located on

the CE-REMOTE cable lead.

STEP 3: Activate OSD Control

Activate OSD control by pressing the SETUP button. Press and

hold the SETUP button for PIXIM DPS WDR cameras. Refer to

camera manual for detailed information on OSD adjustments.

STEP 4: When Finished Replace DIN Cap.

SETUP

NOTE: THE REMOTE DOES NOT REQUIRE BATTERIES TO OPERATE

v.03.13.09

CLINTON Electronics

6701 Clinton Road

Loves Park, IL 61111

1.800.447.3306 Sales

1.800.549.6396 Support

1.800.633.8712 Fax

www.clintonelectronics.com

CLINTON

Electronics

CE-REMOTE Instruction GuideSTEP 1: Connecting the Remote to the CameraLocate the CE-REMOTE DIN port on the camera and plug in the CE-REMOTE. The DIN

Sem comentários

Clinton-electronics CE-REMOTE Manual do Utilizador